I also found bits of wood and metal filings on the inside of the cover plate.

我发现电锯盖板里还有木屑和金属屑末。

Reattach cover plate to make an air and water tight seal.

重新固定盖板,并紧密密封防止空气和水通过.

The injection mould for a duplicator cover plate is designed.

设计了复印机盖板的注塑模具.

Remove all nuts and bolts from cover plate and take off plate.

从盖板上拆卸所有螺母和螺栓,然后将盖板拿开.

Disconnect the hose from the bottom cover plate to the relief valve.

断开底部盖板到安全阀上的软管.

Loosen bolts on groove coupler and remove groove coupler and cover plate from body.

松开沟槽连接器上的螺栓,从阀体上拆卸沟槽连接器和盖板.

Adjust the Mounting Bracket so that the Sensor sits flush against the cover plate.

请调整安装架使得感应器与盖板处于合适的位置.

Our company specializes in producing high - grade ware and bathroom accessories and plastic cover plate.

本公司专业生产 高档 卫浴及卫浴配件,塑料盖板.

Parts and components products include: chassis, cover plate, stamped steel , brush components, electrophoresis rotor, etc.

零部件产品有: 机壳 、 盖板、冲片 、 电刷组件 、 电泳转子等.

The forming thethe structure of the diethe cover plate and the die manufacturing process were introduced.

文章提出了在钛复合板压力容器的焊接中采用盖板敷设焊接,并具体介绍了盖板的结构及其焊接方法.

Loosen bolts on groove coupler and remove groove coupler and cover plate from valve body.

松懈沟槽状联结器上的螺栓,从阀体上拆卸沟槽状联结器和阀盖板.

Remove the cover plate of the relief valve by removing the four connecting screws.

通过拆卸四个连接螺丝来拆卸安全阀盖板.

Bolted cover plate to protect seal and cylinder from the ingress of debris.

上盖板可防止杂物进入缸筒损坏密封.